The Audi CNCB is a 1,968 cc, inline — four turbo — diesel engine produced between 2018 and 2023. It features common rail direct injection, a variable geometry turbocharger (VGT), and dual overhead camshafts (DOHC) with dual — mass flywheel integration. In standard output form, it delivers 110 kW (150 PS), with higher outputs reaching 140 kW (190 PS) and torque between 340–400 Nm, providing strong low — end responsiveness for daily driving.
Fitted to models such as the 8Y A3, 8…
All production years (2018–2023) comply with Euro 6 emissions standards depending on market .
The Audi CNCB is a 1,968 cc inline-four turbo-diesel engine designed for compact and mid-size models (2018–2023). It combines Bosch CRS 3-20 common-rail injection with a single variable-geometry turbocharger to deliver responsive low-RPM torque and efficient highway cruising. Engineered to meet Euro 6 emissions standards, it balances drivability with regulatory compliance across European markets.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,968 cc | |
Fuel type | Diesel | |
Configuration | Inline-4, DOHC, 16-valve | |
Aspiration | Turbocharged | |
Bore × stroke | 81.0 mm × 95.5 mm | |
Power output | 110–140 kW (150–190 PS) | |
Torque | 340–400 Nm @ 1,750–3,000 rpm | |
Fuel system | Bosch CRS 3-20 common-rail (up to 2,500 bar) | |
Emissions standard | Euro 6 | |
Compression ratio | 16.5:1 | |
Cooling system | Water-cooled | |
Turbocharger | Single variable-geometry turbo (Honeywell) | |
Timing system | Chain (front-mounted; revised guides post-2014) | |
Oil type | Refer to vehicle handbook / manufacturer specification | |
Dry weight | 158 kg |
The Audi CNCB was used across Audi's 8Y/8W/3G platforms with longitudinal mounting and integrated AdBlue dosing. This engine received platform-specific adaptations—reinforced mounts in the A6 and revised intake manifolds in the A3—and from 2021 the facelifted A4 B9.5 adopted updated SCR calibration, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
Field reports and technical service bulletins highlight component wear patterns under high-load operation. Adherence to manufacturer service intervals and approved fluid specifications is critical for long-term reliability.
Analysis derived from manufacturer technical service bulletins and industry workshop records. Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The CNCB delivers strong torque and good efficiency, but early models (2018–2019) had reliability concerns, particularly high-pressure fuel pump failures. Later revisions (post-2020) improved pump durability, so well-maintained examples can be quite robust. Regular servicing and using high-quality oil (5W-30 Audi Longlife-04) greatly aid longevity.
The biggest issues are high-pressure fuel pump failure (leading to hard starts or no-start), turbo actuator sticking, and EGR/intake carbon buildup. Other complaints include oil leaks from the timing cover gasket and occasional DPF regeneration faults. These are well-documented in Audi service bulletins.
This 2.0L diesel was used widely across Audi's lineup (Euro6 era models). It appeared in the A3 (8Y), A4 (8W), A5 (8T), and A6 (3G), with variants including 150 TDI and 190 TDI. It was phased out by 2023 in favor of EA288 evo units with improved efficiency and reduced emissions.
Aftermarket ECU tuning is common on the CNCB platform, but increasing boost or altering engine parameters accelerates component wear, impacts emissions compliance, and may void vehicle warranties. Any modifications should be evaluated carefully by a qualified specialist.
Very good. In an A4 150 TDI (2019), typical consumption is ~6.6 L/100km (city) and ~4.7 L/100km (highway), or about 45 mpg UK combined. Smaller models (A3) with the same engine often achieve slightly better economy. Real-world figures depend on driving style, but expect 43–50 mpg (UK) on mixed roads for a healthy CNCB engine.
Yes. The CNCB series (like most modern Audis) is an interference engine. This means if the timing chain jumps or breaks, pistons can hit open valves, causing serious engine damage. That's why chain maintenance is critical—any warning rattles should be addressed immediately.
Audi specifies a 5W-30 synthetic oil meeting Audi Longlife-04 (or newer) spec. Always use a high-quality oil designed for turbo diesels and change it every 15,000 km or as Audi recommends to ensure proper chain lubrication and minimize soot buildup.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.