The Ford J4S is a 1,998 cc, inline — four, naturally aspirated petrol engine produced between 2021 and 2025. It forms part of Ford's Sigma engine family, designed for mid — size vehicle applications and balanced performance. Featuring dual overhead camshafts (DOHC), multi — point fuel injection (MPFI), and Ti — VCT (Twin — independent Variable Cam Timing), it delivers 125 kW (170 PS) and 200 Nm of torque, offering responsive mid — range power for highway and urban use.
Fitted…
All production years 2021–2025 meet Euro 6.2 standards .
The Ford J4S is a 1,998 cc inline-four petrol engine engineered for mid-size models (2021–2025). It combines multi-point fuel injection with Ti-VCT variable valve timing to deliver responsive mid-range performance and reliable daily driving. Designed to meet Euro 6.2 standards, it balances power output with emissions compliance.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,998 cc | |
Fuel type | Petrol (Unleaded, 95 RON) | |
Configuration | Inline-4, DOHC, 16-valve | |
Aspiration | Naturally aspirated | |
Bore × stroke | 82.5 mm × 93.2 mm | |
Power output | 125 kW (170 PS) @ 6,500 rpm | |
Torque | 200 Nm @ 4,500 rpm | |
Fuel system | Multi-point fuel injection (MPFI) | |
Emissions standard | Euro 6.2 (6d) | |
Compression ratio | 12.0:1 | |
Cooling system | Water-cooled | |
Turbocharger | Not applicable | |
Timing system | Timing chain (maintenance-free) | |
Oil type | Refer to vehicle handbook / manufacturer specification | |
Dry weight | 132 kg |
The Ford J4S was used across Ford's Mk4 Focus and Mk3 Kuga platforms with transverse mounting and front-wheel drive. This engine received platform-specific adaptations-integrated starter-generator (ISG) compatibility in mild-hybrid variants-and from 2023 the facelifted Kuga Titanium adopted revised intake manifolds for improved low-end torque, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
Field reports and technical service bulletins highlight component wear patterns under high-load operation. Adherence to manufacturer service intervals and approved fluid specifications is critical for long-term reliability.
Analysis derived from manufacturer technical service bulletins and industry workshop records. Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The J4S is generally reliable with proper maintenance. Its naturally aspirated design avoids turbo-related complexities, but timing chain tensioner wear is a known concern in early units. Using Ford-spec 5W-30 oil and adhering to 15,000 km service intervals ensures longevity. Most issues are preventable with proactive care and correct oil usage.
The main issues are timing chain tensioner wear, intake valve carbon buildup, and throttle body coking. Less commonly, coolant leaks from the thermostat housing occur. These are documented in Ford WSM and service bulletins. Tensioner-related faults are the most frequent, often appearing after 60,000–100,000 km in vehicles with extended oil intervals.
The J4S engine was used in the Focus Mk4 (2.0 Ti-VCT and Hybrid), Kuga Mk3 (2021–2023 non-ST models), and Mondeo (2021–2022). It replaced the older Duratec engine and was phased out in favour of electrified powertrains. All models are front-wheel drive with transverse engine layout.
Limited tuning potential exists. As a naturally aspirated engine without direct injection, ECU remaps offer minimal gains (typically +5–10 kW). Performance upgrades like intake filters or exhausts yield small improvements. Significant power increases require forced induction conversion, which is complex and not OEM-supported. Most owners focus on maintenance rather than tuning.
In a Focus 2.0 Ti-VCT, combined consumption is ~7.2 L/100km (~39 mpg UK). City driving may see 8.5 L/100km (~33 mpg), while highway runs can achieve 6.0 L/100km (~47 mpg). Mild-hybrid variants improve urban efficiency by up to 0.8 L/100km. Real-world figures depend on driving style and conditions.
Yes. The J4S is an interference engine. If the timing chain fails or jumps, piston-to-valve contact can occur, causing severe internal damage. While chain failure is rare, any abnormal noise from the timing cover should be investigated immediately to prevent costly repairs.
Ford specifies WSS-M2C949-A (5W-30) synthetic oil. This low-SAPS formulation protects the Ti-VCT system and maintains timing chain lubrication. Oil changes are recommended every 15,000 km or 12 months. Using non-compliant oil may lead to sludge, actuator failure, or carbon buildup.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.