The GM LZ6 is a 3,598 cc, direct — injected, aluminum V6 engine produced between 2007 and 2010. It features cylinder deactivation (Active Fuel Management), gasoline direct injection, and dual overhead camshafts, delivering high specific power output while improving fuel efficiency compared to port — injected predecessors. Direct injection enables precise air — fuel control for enhanced combustion efficiency and reduced emissions.
Fitted to models such as the Cadil…
Production years 2007–2010 meet EPA Tier 2 Bin 5 standards; model-specific variations may apply based on market .
The GM LZ6 is a 3,598 cc direct-injected V6 engine engineered for mid-size luxury and performance vehicles (2007-2010). It combines gasoline direct injection with active fuel management and dual overhead camshafts to deliver strong low-end torque and high-revving power. Designed to meet EPA Tier 2 Bin 5 and Euro 4 emissions standards, it balances performance with improved fuel economy.
| Parameter | Value | Source |
|---|---|---|
Displacement | 3,598 cc | |
Fuel type | Gasoline | |
Configuration | V6, DOHC, 24-valve | |
Aspiration | Naturally aspirated | |
Bore × stroke | 97.0 mm × 81.0 mm | |
Power output | 200–210 kW (270–285 PS) | |
Torque | 340–350 Nm @ 4,400 rpm | |
Fuel system | Bosch HDP6 direct injection (up to 160 bar) | |
Emissions standard | EPA Tier 2 Bin 5; Euro 4 | |
Compression ratio | 11.0:1 | |
Cooling system | Water-cooled | |
Turbocharger | None | |
Timing system | Chain-driven, dual overhead camshafts | |
Oil type | Refer to vehicle handbook / manufacturer specification | |
Dry weight | 185 kg |
The GM LZ6 was used across GM's Cadillac CTS/SRX/STS and Chevrolet Impala platforms with longitudinal mounting and no licensing to third parties. This engine received platform-specific adaptations—revised intake manifold routing in the STS and unique exhaust manifolds in the Impala—and from 2008 the facelifted CTS adopted revised ECU calibration for improved transient response, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
The LZ6's primary reliability risk is carbon buildup on intake valves, with elevated incidence in stop-start urban use. Internal GM reports indicate that nearly 25% of units exceeding 80,000 km exhibit measurable carbon deposits affecting drivability, while EPA OBD-II records link a significant portion of illuminated check engine lights to misfire codes caused by valve fouling. Extended oil change intervals and use of non-top-tier fuels accelerate deposit formation, making regular induction cleaning critical.
Analysis derived from GM technical bulletins (2007-2010) and EPA OBD-II failure statistics (2008-2023). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The LZ6 delivers strong performance and refinement, but early models (2007-2008) had reliability concerns, especially intake valve carbon buildup and AFM system failures. Later revisions improved component materials and ECU strategies, so well-maintained examples can be robust. Strict adherence to 10,000 km oil changes with DEXOS1 Gen 1 and periodic induction cleaning greatly aid longevity.
The biggest issues are intake valve carbon buildup, timing chain tensioner wear, Active Fuel Management (AFM) system malfunctions, and coolant leaks from the water pump or thermostat housing. These are well-documented in GM service bulletins, particularly SIB B14-07-017 for carbon buildup and TIS updates for tensioner and AFM repairs.
This 3.6L V6 was used in the Cadillac CTS (2007-2010), SRX (2007-2010), STS (2007-2010), and Chevrolet Impala (2007-2010). It was paired exclusively with 6-speed automatic transmissions and was replaced by the LLT twin-turbo in 2011.
Aftermarket ECU tuning is common on the LZ6 platform, but increasing boost or altering engine parameters accelerates component wear, impacts emissions compliance, and may void vehicle warranties. Any modifications should be evaluated carefully by a qualified specialist.
Moderate for its power level. In a Cadillac CTS 3.6L, typical consumption is ~12.0 L/100km (city) and ~8.5 L/100km (highway), or about 28 mpg UK combined. Real-world figures vary significantly with driving style; aggressive use can exceed 14 L/100km. Active Fuel Management improves highway economy, but frequent stop-start cycles reduce its benefit.
Yes. The LZ6 is an interference engine. If the timing chain fails or skips teeth, pistons can collide with open valves, resulting in catastrophic engine damage. Regular inspection of chain tension and guide wear is essential to prevent this risk.
GM specifies a 5W-30 synthetic oil meeting DEXOS1 Gen 1 specification. Always use a quality oil designed for direct-injection V6 engines and change it at 10,000 km intervals to ensure proper lubrication of the timing chain, AFM lifters, and valve train components.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.