The GM LZL is a 3,604 cc, V6, naturally aspirated gasoline engine produced between 2010 and 2013. It features an aluminum block with cast iron cylinder liners, dual overhead camshafts, and variable valve timing (VVT), delivering refined power delivery and improved fuel efficiency over previous generations. The VVT system enables optimized valve timing across the rev range for enhanced low — end torque and responsiveness.
Fitted to models such as the Chevrolet Impala, B…
Production years 2010–2012 meet Euro 4 standards; 2013 models may have Euro 5 compliance depending on market .
The GM LZL is a 3,604 cc V6 naturally aspirated gasoline engine engineered for mid-size sedans and crossovers (2010-2013). It combines dual overhead camshafts with variable valve timing to deliver refined performance and efficient cruising. Designed to meet Euro 4 (and some market-specific Euro 5) standards, it balances everyday drivability with fuel economy.
| Parameter | Value | Source |
|---|---|---|
Displacement | 3,604 cc | |
Fuel type | Gasoline | |
Configuration | V6, DOHC, 24-valve | |
Aspiration | Naturally aspirated | |
Bore × stroke | 95.0 mm × 84.5 mm | |
Power output | 190–205 kW (258–279 PS) | |
Torque | 340–360 Nm @ 4,400 rpm | |
Fuel system | Multi-point fuel injection (MPFI) | |
Emissions standard | Euro 4 (pre-2013); Euro 5 depending on market | |
Compression ratio | 10.5:1 | |
Cooling system | Water-cooled | |
Timing system | Chain-driven | |
Oil type | Refer to vehicle handbook / manufacturer specification | |
Dry weight | 178 kg |
The GM LZL was used across GM's Epsilon II platform with transverse mounting and no licensed external usage. This engine received platform-specific adaptations—revised intake runner geometry for the Impala and revised ECU calibration for the SRX—and from 2011 the facelifted Impala adopted updated valve stem seals and revised PCV system, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
Field reports and technical service bulletins highlight component wear patterns under high-load operation. Adherence to manufacturer service intervals and approved fluid specifications is critical for long-term reliability.
Analysis derived from manufacturer technical service bulletins and industry workshop records. Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The LZL is generally robust with proper maintenance, but early models (2010–2011) are susceptible to intake valve carbon buildup and oil consumption issues. Later revisions improved valve stem seals and ECU strategies. Regular oil changes with GM dexos1™ Gen 2 and periodic induction cleaning significantly extend service life. Avoid prolonged short-trip driving where possible.
The biggest issues are intake valve carbon buildup causing rough idle and misfires, EGR valve clogging leading to emissions failures, increased oil consumption from worn valve stem seals, and occasional timing chain rattle. These are well-documented in GM service bulletins, particularly SI-49155 and TIS updates from 2010–2012.
The LZL was used exclusively in GM’s Epsilon II platform: Chevrolet Impala (2010–2013), Buick LaCrosse (2010–2013), and Cadillac SRX (2010–2011). It replaced the earlier 3.5L LY5 and preceded the 3.6L LFX. No other manufacturers used this specific variant.
Limited potential. The LZL is designed for efficiency, not performance. ECU remaps can yield modest gains of +5–10 kW, but without supporting modifications like upgraded intake/exhaust, results are minimal. Stock internals are adequate for factory outputs but not suited for aggressive tuning. Over-tuning risks detonation due to its 10.5:1 compression ratio.
Good for its class. In an Impala or LaCrosse, typical consumption is ~9.8 L/100km (city) and ~7.0 L/100km (highway), or about 40 mpg UK combined. Real-world figures vary with driving style and climate, but expect 36–44 mpg (UK) on mixed roads for a healthy engine with clean intake valves and EGR system.
Yes. The LZL is an interference engine. If the timing chain fails or jumps, pistons can contact open valves, resulting in severe internal damage such as bent valves or damaged pistons. Timely inspection and replacement of the timing chain tensioner and guides are essential for safety and longevity.
GM specifies a 5W-30 synthetic oil meeting GM dexos1™ Gen 2 specification. Always use a quality oil designed for modern gasoline engines and change it at 10,000–15,000 km intervals to minimize carbon buildup and protect valve train components. Using incorrect oil accelerates deposit formation and increases oil consumption.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.