The Renault C1J 700 is a 1,647 cc, inline‑four petrol engine produced between 1985 and 1992. It features a single overhead camshaft (SOHC) and two valves per cylinder, delivering outputs suited for compact family cars. In standard form, it produced approximately 59 kW (80 PS), prioritising low — cost manufacturing and mechanical simplicity over peak performance.
Fitted to models such as the R9, R11, and early R19, the C1J 700 was engineered for reliable, economical motor…
Production years 1985–1992 meet Euro 1 standards as per applicable regulations for vehicles of that era records).
The Renault C1J 700 is a 1,647 cc inline‑four petrol engine engineered for compact hatchbacks and saloons (1985-1992). It combines a simple SOHC valvetrain with carburetion to deliver adequate power for daily commuting. Designed to meet Euro 1 standards, it emphasises serviceability and cost-effective ownership.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,647 cc | |
Fuel type | Petrol | |
Configuration | Inline‑4, SOHC, 8‑valve | |
Aspiration | Naturally aspirated | |
Bore × stroke | 75.8 mm × 91.0 mm | |
Power output | 59 kW (80 PS) @ 5,500 rpm | |
Torque | 125 Nm @ 3,000 rpm | |
Fuel system | Carburetor or Single‑point injection | |
Emissions standard | Euro 1 | |
Compression ratio | 9.0:1 | |
Cooling system | Water‑cooled | |
Turbocharger | None | |
Timing system | Chain‑driven camshaft | |
Oil type | SAE 10W‑40 (Mineral) | |
Dry weight | Not specified in available OEM docs |
The Renault C1J 700 was used across Renault's R9/R11 platforms with transverse mounting. This engine received minor platform-specific adaptations-different intake manifolds and accessory brackets-and from 1990 the R19 Phase 1 models used a slightly revised version with updated engine management, creating minor parts differences. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
The C1J 700's primary reliability risk is camshaft lobe wear, with elevated incidence in high-mileage or poorly maintained examples. Renault Technical Note MEC 015 documents this failure mode, while general owner reports highlight carburetor and ignition system issues in neglected vehicles. Extended service intervals and poor fuel quality accelerate wear, making adherence to basic maintenance critical.
Analysis derived from Renault technical bulletins (1985-1992) and general owner/mechanic consensus for vehicles of this era. Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The C1J 700 is generally reliable with proper maintenance. Its simple SOHC design is robust, but early engines are susceptible to camshaft lobe wear if oil changes are neglected. Addressing this known issue and maintaining the carburetor and ignition system allows these engines to achieve high mileages reliably.
The most frequent issues are camshaft lobe wear (especially in pre-1988 engines), carburetor problems like sticking or flooding, failure of the distributor cap/rotor/ignition coil, and leaks from aging cooling system components like hoses and the water pump. These are well-documented in Renault service information.
The C1J 700 engine was primarily used in the Renault R9 and R11 (1985-1989) and the early Phase 1 Renault R19 (1989-1992). It served as the mid-range 1.6L petrol engine for these compact models during their respective production runs, positioned above the 1.4L C1E.
Minor tuning is feasible. Upgrading the carburetor, fitting a performance exhaust, and advancing ignition timing can yield small gains. However, the engine's SOHC 8-valve design and modest compression ratio limit significant power increases without major internal modifications, which are rarely cost-effective for this engine.
Fuel economy is typical for its era. Expect around 8.0-9.0 L/100km (35-31 mpg UK) in combined driving for a carbureted R9/R11. Fuel-injected R19 models might achieve slightly better figures, around 7.5-8.5 L/100km (38-33 mpg UK), depending on condition and driving style.
No. The Renault C1J 700 is a non-interference engine. If the timing chain were to fail, the pistons and valves would not collide, preventing catastrophic internal damage. This is a key reliability feature inherited from the C1E engine family.
Renault originally specified a mineral SAE 10W-40 oil. For modern use, a high-quality semi-synthetic 10W-40 or 15W-40 meeting ACEA A3 specifications is suitable and provides better protection. Change intervals should be kept at 10,000 km or annually to prevent camshaft wear.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.