The Ford SPJE is a 1,499 cc, inline‑three turbocharged petrol engine produced between 2024 and 2025. It features direct fuel injection, a single twin — scroll turbocharger, and dual overhead camshafts (DOHC). In standard form it delivers 110 kW (150 PS) and 240 Nm of torque, engineered for responsive urban driving and efficient highway cruising.
Fitted to models such as the Puma and Focus across European markets, the SPJE was engineered to balance everyday usability with…
All production years (2024–2025) meet Euro 6d standards .
The Ford SPJE is a 1,499 cc inline‑three turbocharged petrol engineered for compact applications (2024–2025). It combines direct injection with a twin‑scroll turbocharger to deliver brisk low‑end torque and smooth throttle response. Designed to meet Euro 6d from launch, it balances drivability with stringent emissions compliance.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,499 cc | |
Fuel type | Petrol (Unleaded, 95 RON min) | |
Configuration | Inline‑3, DOHC, 12‑valve | |
Aspiration | Turbocharged (twin‑scroll) | |
Bore × stroke | 79.0 mm × 81.0 mm | |
Power output | 110 kW (150 PS) @ 6,000 rpm | |
Torque | 240 Nm @ 1,600–4,000 rpm | |
Fuel system | Bosch HDP6 high‑pressure direct injection (up to 350 bar) + in-tank low-pressure pump | |
Emissions standard | Euro 6d | |
Compression ratio | 10.5:1 | |
Cooling system | Water‑cooled with dual‑circuit layout | |
Turbocharger | Garrett twin‑scroll (MGT2256VZ) | |
Timing system | Chain (front‑mounted, maintenance‑free design) | |
Oil type | Ford WSS-M2C948-B1 (SAE 0W‑20) | |
Dry weight | 110 kg |
The Ford SPJE was used across Ford's B‑Car platform with transverse mounting and no external licensing. This engine received platform-specific calibrations—revised GPF tuning for urban Puma variants—and from late 2025 the LPFP firmware update created minor ECU interchange limits. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
Field reports and technical service bulletins highlight component wear patterns under high-load operation. Adherence to manufacturer service intervals and approved fluid specifications is critical for long-term reliability.
Analysis derived from manufacturer technical service bulletins and industry workshop records. Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The SPJE is generally reliable when operated within design parameters. Early units (2024–late 2025) had LPFP thermal derating concerns in extreme heat, but revised firmware and software improved robustness. Regular oil changes with Ford-specified 0W-20 and occasional highway driving ensure GPF health and long-term durability.
Top issues include LPFP thermal derating in extreme heat, GPF overloading from short trips, intake valve carbon buildup (due to direct injection only), and occasional turbo actuator calibration drift. All are documented in Ford service bulletins with updated procedures available.
The SPJE powers the Puma (2024–2025) and Focus Mk4 (2024–2025) with 150 PS output. It’s exclusive to Ford and not shared with other manufacturers. It represents the latest evolution of the 1.5L EcoBoost family for Euro 6d compliance.
Aftermarket ECU tuning is common on the SPJE platform, but increasing boost or altering engine parameters accelerates component wear, impacts emissions compliance, and may void vehicle warranties. Any modifications should be evaluated carefully by a qualified specialist.
In a Puma, expect ~7.2 L/100km (city), ~5.0 L/100km (highway), or ~39 mpg UK combined. Real-world mixed driving typically yields 35–42 mpg UK. Economy drops with aggressive driving or frequent short trips due to GPF regeneration cycles.
Yes. The SPJE is an interference design. If the timing chain fails (extremely rare due to front-mounted, life-of-engine design), piston-to-valve contact can cause catastrophic damage. However, chain failure is not a documented field issue.
Ford mandates WSS-M2C948-B1 (0W-20) synthetic oil. This low-viscosity spec is critical for GPF protection, low-friction operation, and emissions compliance. Never substitute with 5W-30 or non-approved oils.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.