The Renault 800.02 is a 1,289 cc, inline — four petrol engine produced between 1973 and 1976. It features a single overhead camshaft, two valves per cylinder, and a twin — barrel carburettor, delivering 60 PS at 5,400 rpm with torque of 95 Nm at 3,000 rpm. Its design prioritized low — end responsiveness and fuel economy for compact urban vehicles.
Fitted to the Renault 5 and early Renault 12 models, the 800.02 was engineered for economical daily use, offering smooth accelerati…
Production years 1973–1976 meet pre-Euro emissions standards; compliance varied by national regulation .
The Renault 800.02 is a 1,289 cc inline-four naturally aspirated petrol engine engineered for subcompact family cars (1973–1976). It combines a single overhead camshaft with a twin-barrel carburettor to deliver responsive low-speed torque and quiet operation. Designed to meet the emissions and efficiency expectations of its era, it balances simplicity with durability.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,289 cc | |
Fuel type | Petrol | |
Configuration | Inline-4, SOHC, 8-valve | |
Aspiration | Naturally aspirated | |
Bore × stroke | 75.0 mm × 73.0 mm | |
Power output | 60 PS (44 kW) @ 5,400 rpm | |
Torque | 95 Nm @ 3,000 rpm | |
Fuel system | Solex 32 PBI twin-barrel carburettor | |
Emissions standard | Pre-Euro (French Regulation 1973) | |
Compression ratio | 8.8:1 | |
Cooling system | Water-cooled | |
Turbocharger | None | |
Timing system | Chain-driven camshaft | |
Oil type | SAE 20W-50 mineral oil | |
Dry weight | 110 kg |
The Renault 800.02 was used across Renault's R5/R12 platforms with transverse mounting and no licensed external partnerships. This engine received platform-specific adaptations-revised intake manifold length in the R5 and modified carburettor linkage in the R12 Légère-and from 1975 the facelifted R5 adopted hardened valve seats per Renault SIB 800-002, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Engine Finders UK Ltd, which operates EngineCode.uk, can pass your enquiry to engine suppliers in the UK. The service is for vehicles in the United Kingdom, with UK delivery or fitting. This is a commercially connected service, and sending an enquiry does not confirm diagnosis or compatibility.
Diagnostic reminder: If a technician has recommended replacing the engine, you can send an enquiry to engine suppliers in the UK. Confirm the diagnosis first: an engine-code record does not diagnose a fault.
Field reports and technical service bulletins highlight component wear patterns under high-load operation. Adherence to manufacturer service intervals and approved fluid specifications is critical for long-term reliability.
Analysis derived from manufacturer technical service bulletins and industry workshop records. Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The Renault 800.02 is mechanically simple and robust if maintained correctly. Early units (pre-1975) suffer from valve seat recession, but post-1975 revisions resolved this. Regular oil changes with SAE 20W-50 and timely valve adjustments ensure longevity. Well-cared-for examples remain functional today with minimal issues.
The biggest issues are valve seat recession on pre-1975 engines, carburettor flooding due to ageing components, timing chain stretch, and head gasket failure from overheating. These are well-documented in Renault service bulletins and owner manuals.
The 800.02 engine was used exclusively in the Renault R5 and R12 models between 1973 and 1976. It powered variants including the R5 1300, R5 Super, R12 1300, and R12 Légère. No other Renault models or external manufacturers used this specific engine variant.
Limited tuning potential exists. Minor gains of 3–5 PS are possible with a free-flow exhaust and re-jetted carburettor. However, the SOHC design and low compression limit significant upgrades. Forging higher outputs risks damaging the crankshaft or connecting rods due to stock internal strength thresholds.
Excellent for its era. In a Renault R5 Légère, typical consumption is approximately 7.8 L/100km (36 mpg UK) in city driving and 6.5 L/100km (43 mpg UK) on the highway, averaging around 40–45 mpg UK combined. Economy improves with clean carburettor settings and proper valve clearances.
No. The Renault 800.02 is a non-interference engine. If the timing chain fails, the pistons will not contact the valves, preventing catastrophic internal damage. However, loss of timing will still cause immediate stalling and require repair.
Renault specifies SAE 20W-50 mineral oil for all operating conditions. Modern synthetic oils are not recommended due to potential seal incompatibility. Oil must be changed every 6,000 km or annually, whichever comes first, to prevent valve seat and lifter wear.
Comprehensive technical documentation and regulatory references
EngineCode.uk is operated by Engine Finders UK Ltd. It provides engine-reference information and an optional commercial enquiry service. It is not an official manufacturer website. Check the record's sources and confirm vehicle-specific details before relying on it for parts, repairs or replacement.
Our editorial standard prioritises relevant manufacturer documentation and official regulatory sources. The sources and verification status for a record should be checked alongside the data.
A statement is not verified merely because a source is listed. Where supporting evidence is missing or conflicting, the record should identify that limitation. Please report unsupported or inconsistent information.
Transparency in gaps
A missing or unverified value does not mean the manufacturer has withheld it. We distinguish information not yet verified, information not available to us, and information explicitly not disclosed by the source.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Records are subject to review and correction. Source links, dates and verification notes should be read with the technical information. Our Editorial and Sourcing Policy explains our standards and review process.
Found an error or missing source? Report a problem with this page. Include the field or statement concerned and a supporting source if available. You can also email corrections@enginecode.uk.
Copyright and permissions
Images and other material may be protected by copyright. Attribution does not by itself grant permission to reuse material. If you believe material on this site infringes your rights, contact copyrights@enginecode.uk with the page URL and details of your claim. We will review the material and take appropriate action.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
Our Privacy Policy explains how Engine Finders UK Ltd uses information from visits, vehicle lookups, enquiries and messages. Our Cookie Policy explains cookies and similar technologies and how to change your choices.
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
Ownership and commercial services
EngineCode.uk is owned and operated by Engine Finders UK Ltd. Alongside our reference content, we offer an optional replacement-engine enquiry service through Engine Finders and may identify relevant services provided by businesses connected with us. These commercial connections are disclosed. Using an enquiry service is not required to read our reference content.
Engine Finders UK Ltd operates this website. Our optional enquiry service has a commercial purpose. Our Ownership and Commercial Disclosure explains the relationship between the reference website and that service. Participating suppliers pay a fee or subscription to participate on the network and receive quote requests.
Use this record as a starting point for identification. Specifications and vehicle applications may contain errors or omissions. Confirm the exact engine variant and compatibility using vehicle-specific documentation and a qualified supplier or technician.
All external links open in new tabs. Please verify current availability of resources.